Contact__Downloads__Education__Sports__Games__Mapquest__News__Weather__Coupon Codes

Help Desk
Baby
Products
Makita 6347DWDE 18-
Volt Cordless Driver-Drill
Kit (2-Speed, Variable
Speed, Reversible)
Makita 6935FDWDEX,
14.4 Volt Cordless
Impact Driver Kit w/ 6337
MForce Drill and Fluore-
scent Work Light(ML143)

You can finish any woodworking project with this limited edition kit that includes both a finish nailer, brad nailer, and compressor. Ideal for on site trim work, architectural woodwork, and casework installation, this finish nailer and compressor kit from Porter Cable is perfect for the finish trim installer. Uses standard 16 gauge brad nails from 3/4 to 2 1/2 inches

Porter-Cable
CFFN250N Finish
& Brad Nailer
Combo Kit 		Convenience has never been more simple. You can now have a 3 position drill and screwdriver, tape measure, light and more in one compact, easy to-grip cordless power tool with the new 6 Volt Pivot Plus Drill and Driver with Measuring Tape. The Pivot Plus is small enough to fit in the kitchen drawer, but packs the power and on board features to take on projects all over the house. Without having to haul out your tool box, you can decorate, make over a room, hang pictures, install blinds and more; all with this one handy tool. The Pivot Plus has everything built right in to let you measure your project area, mark it, drill holes and drive screws. Working in the dark? A light on the front of the Pivot Plus illuminates dark work areas and can be turned on and off with a separate switch. The Pivot Plus 3 position pivoting action offers maximum flexibility to get into tight areas. It also gives you more power than your typical power screwdriver, offering plenty of power to drill as well. A 5 foot retractable tape measure snaps into the handle of the Pivot Plus and is always there when you need it. You can make short measurements leaving the tape measure in the Pivot Plus handle or pop it out for longer measurements.
Black & Decker PD600
Pivot Plus 6-Volt High
Performance Screwdriver
Baby
Registry
Best buys
Books
Cell
Phones
Clothing
Shoes		 Take the back ache out of setting up and breaking down your table saw with the revolutionary new Gravity', Rise wheeled saw stand from Bosch. Designed for general contractors, trim carpenters, woodworkers and remodelers, the Bosch TS2000 Gravity, Rise stand is a rugged, portable, and, best of all, easy to use. Setup is a snap! Simply turn the release lever, put your hand on the tabletop, and the stand raises and lowers relative to your hand pressure so that you can find just the right height for your tired back. Constructed of heavy gauge tubular steel, the Gravity, Rise stand is built to withstand the toughest jobsites. Eight inch treaded pneumatic wheels easily handle rough terrain and make tool transport nearly effortless. The Gravity, Rise is equipped with Universal Mounting Slots, which are designed to accommodate most major manufacturers portable table saws.
Bosch TS2000 Gravity-
Rise Wheeled Table
Saw Stand with
Universal Mounting Slots 		The worlds best jigsaw just got better. Boschs Top Handle Jigsaw now Features an exclusive Precision Control Blade System that provides unsurpassed cutting accuracy. A powerful, 6.4 amp, variable speed motor cranks out between 500 and 2,800 strokes per minute for fast, smooth cuts. A One Touch Blade Change mechanism means less downtime and more productivity. The saws Constant Response Circuitry keeps the blade moving at the desired speed for added control and consistent performance. The saw also Features a wrench less foot with tension adjustment for fast, easy bevel cutting, trigger controlled variable speeds for matching the cutting speed to the job, a 4 position orbital action, and an adjustable blower. A soft grip handle means less operator fatigue, more comfort, and better control, and a padded overshoe prevents marring of the workpiece. Your purchase includes three blades, an anti splinter insert, and a durable carrying case.
Bosch 1590EVSK
Top Handle Jigsaw 		The DC988 18 Volt XRP ½ drill, driver, hammerdrill uses a DEWALT built high torque, high efficiency motor to deliver 500 in. lbs. of torque for drilling large diameter holes and driving large screws. This XRP drill comes equipped with a patented 3 speed transmission. The 3 speed option allows the drill to be set at the optimum speed range for the application being performed to maximize performance. The DC988 has a max speed of 2,000 RPM which is 38% faster than high speed. This unit has a maximum BPM speed of 34,000 BPM which allows for high performance drilling in masonry applications. All XRP drills feature a ½ all metal, ratcheting chuck with carbide jaws to prevent bit slipping and bit fall out. Every XRP drill is powered by an XRP extended run time battery that gives the drill long run time and battery life. The DC988 offers superior ergonomics providing optimal balance, comfort, and weight to minimize user fatigue. XRP drills are built to allow for the standard nut drivers, screwdriver, and bit tip holders to be stored on the tool. Designed for quick cutting and light grinding, in tight spaces and areas where power is not available. The DC410 4 1/2-inch cut off tool just made cutting easier and more convenient. Powered by DeWalt's 18 volt system, this tool allows users to expand their current 18 volt DeWalt system. It features a keyless a guard for convenience and versatility for cutting applications.
DEWALT DC988GA
Heavy-Duty XRP 18
Volt Cordless Hammerdrill/
Cutoff Tool Combo Kit 		Routers don't get any bigger and tougher than this Hitachi workhorse. It has the solid construction, horsepower, and features we've come to expect in a top of the line router. Its heft goes a long way toward eliminating vibration, working with the soft-start motor to cut out torque at startup. Despite its nearly 12 pounds, it actually handles as well as most 3 1/4 horsepower routers we have tried in freehand applications. It has a 1/2 inch collet and a wide sub base opening, making it suitable for working with all but the very biggest panel bits. It features electronic variable speed, so the router makes clean cuts in a wide range of different materials. We found the controls to be within easy reach of the handles, and though this is not the quietest router w ha've used, it comes pretty close. We like the unique eight position handles that let the tool be adjusted to the worker rather than the other way around. While this is a topnotch plunge router, it is also an excellent choice for table mounting, and many people choose this model for exactly that reason. This is an all around solid tool that offers more bang per buck than many competing models. Brian Trinen
Hitachi M12V 3-1/4
HP Electronic Variable
Speed 1/2" Plunge
Router
Electronics
Gourmet
Food
Jewelry
Kitchen
Housewares
Music Though this Porter Cable tool is priced higher than comparable DeWalt and Makita models, the 557 is Amazon.coms top selling plate joiner. Its success is perhaps due to its very powerful 7 1/2 amp motor; the largest in the industry, which turns the blade at 10,000 rpm and does an excellent job of making clean cuts in any kind of wood. As well as cutting slots for the standard no. 0, 10, and 20 biscuits, Porter Cables joiner features an exclusive, full thickness, FF biscuit developed especially for cabinet face frames. Another unique feature of the Porter Cable joiner is the 2-inch blade, which is small enough to make cuts in stock as narrow as 1 1/2 inches. We found the microheight adjustment works well, allowing for precise biscuit placement. The tool is well balanced and comfortable to use. Michael Shilling
Porter-Cable 557XXX
Professional Plate
Joiner Kit 		1.5A, Hour Multi Charger, Charges 8.4V-14.4V Firestorm Battery Platforms With 3 Stage Charging Process, Also Charges 9.6V-14.4V Master Mechanic Battery Packs For Models TV230K, TV250K & TV260K-2, LED Charge Indicator Shows Pack Charging, Replace Pack and Pr
Black & Decker
PS1MVC 1-Hour
Multi-Voltage Charger 		The new Bosch 1617EVSPK gives you the best of both the fixed base and plunge router worlds! It features a 12 amp, 2 1/4 horsepower, 8,000 to 25,000 rpm ,no load motor with plunge base and fixed base in a rugged well organized carrying case. This kit features the exclusive quick clamp system, allowing tool free movement of motor from base to base. Other key features include variable speed, soft start, and Constant Response circuitry that maintains speed under load. The depth adjustment system features coarse and microfine bit depth adjustment with resettable indicators. Both bases have large base openings with 2 inch sub base openings, accepting larger bits and providing better visibility. The routers right or left switch and cord locations provide both choice and consistency, and the motor does not rotate during depth adjustment. The tool free templet guide adapter allows quick changes, and both bases feature the Bosch exclusive precision centering design for centering optional templet guides. The motor has a one piece armature shaft for accuracy and long bit shank capacity. The kit includes 1/2 inch and 1/4 inch self releasing collets, templet guide adapter, and comfortable drop forged wrenches.
Bosch 1617EVSPK 2.25
Horsepower Electronic
Variable Speed Plunge
and Fixed Base
Router Kit 		Raw power and 75 percent more capacity to run. With two 3.5 amp NiMH batteries and 390 in./lbs. of torque, packed into a 8.5 inch chassis. Its power, weight ratio is an unequalled package of peak performance. A fan cooled motor, with laser welded fields is state of the art technology. The motor's full torque speed control allows max torque delivery at any rpm, and offers dual speed ranges of 65 through 450 and 200 through 1450 with electronic brake and precision clutch fastening capabilities. Rubberized grip reduces operator fatigue and improves driving comfort. NiMH batteries possess superior charging and discharging characteristics, and are vented for longer cell life. Universal charger charges all past and present Panasonic batteries. Comes with high impact carrying case.
Panasonic EY6432GQKW
15.6-Volt, 1/2"
Cordless Hyperformance
Drill with 2 NiMH Batteries
Outdoor
Living
Tools
Toys
Games
Coupon
Codes
Advertisements

Makita 6347DWDE 18-Volt Cordless Driver-Drill Kit (2-Speed, Variable Speed, Reversible)

Here comes power and efficiency in a great compact size. Before you even press the trigger, you will love how this tool fits in your hand, how well balanced it is. The rubberized grip gives you a sure, comfortable hold, even at odd angles. Performance is top notch, thanks to dual ball bearings, precision balancing and a refined high grade field magnet. We are really impressed by Makitas exclusive Shift Lock Drive. With a single touch, you shift quickly and easily from drill to driver mode, locking out the clutch for superior drilling. And we love it when manufacturers include two batteries with their tools, because that means no down time. The charger handles multi volt batteries, too, so it is good for a wide range. Maintenance is simple because the brushes are accessible. A great, hardworking drill, driver. Kris Jensen Van Heste

Makita 6935FDWDEX, 14.4 Volt Cordless Impact Driver Kit with 6337 MForce Drill and Fluorescent Work Light(ML143)

Lights! Action! Here is the ultimate Impact Driver! Fast and powerful, this 14.4 volt cordless impact driver runs up to two times longer than competitive brands. The compact design has an overall length of only 6 and 5/8", weighs only 3.7lbs. and is fitted with our exclusive L.E.D. light built right in. The high performance Makita motor lasts longer and produces a maximum tightening torque of 1,240 in.lbs. It has externally accessible brushes for easy service, a magnesium gear housing for durability and a ergonomically designed rubber grip for added control. This impact driver is also equipped with an electric brake for fast stopping and a True, variable speed for controlled starts. This unit is packed with the performance, innovation and technology demanded by Professionals such as Electricians, Plumbers, Installers and more. Your purchase includes two batteries, charger and tool case. For a limited time only, this kit will be coming with a 6337D MForce Dril and a Fluorescent Worklight; ML143, as a bonus.

Porter-Cable CFFN250N Finish & Brad Nailer Combo Kit


You can finish any woodworking project with this limited edition kit that includes both a finish nailer, brad nailer, and compressor. Ideal for on site trim work, architectural woodwork, and casework installation, this finish nailer and compressor kit from Porter Cable is perfect for the finish trim installer. Uses standard 16 gauge brad nails from 3/4 to 2 1/2 inches

Black & Decker PD600 Pivot Plus 6-Volt High Performance Screwdriver

Convenience has never been more simple. You can now have a 3 position drill and screwdriver, tape measure, light and more in one compact, easy to-grip cordless power tool with the new 6 Volt Pivot Plus Drill and Driver with Measuring Tape. The Pivot Plus is small enough to fit in the kitchen drawer, but packs the power and on board features to take on projects all over the house. Without having to haul out your tool box, you can decorate, make over a room, hang pictures, install blinds and more; all with this one handy tool. The Pivot Plus has everything built right in to let you measure your project area, mark it, drill holes and drive screws. Working in the dark? A light on the front of the Pivot Plus illuminates dark work areas and can be turned on and off with a separate switch. The Pivot Plus 3 position pivoting action offers maximum flexibility to get into tight areas. It also gives you more power than your typical power screwdriver, offering plenty of power to drill as well. A 5 foot retractable tape measure snaps into the handle of the Pivot Plus and is always there when you need it. You can make short measurements leaving the tape measure in the Pivot Plus handle or pop it out for longer measurements.

Bosch TS2000 Gravity-Rise Wheeled Table Saw Stand with Universal Mounting Slots

Take the back ache out of setting up and breaking down your table saw with the revolutionary new Gravity', Rise wheeled saw stand from Bosch. Designed for general contractors, trim carpenters, woodworkers and remodelers, the Bosch TS2000 Gravity, Rise stand is a rugged, portable, and, best of all, easy to use. Setup is a snap! Simply turn the release lever, put your hand on the tabletop, and the stand raises and lowers relative to your hand pressure so that you can find just the right height for your tired back. Constructed of heavy gauge tubular steel, the Gravity, Rise stand is built to withstand the toughest jobsites. Eight inch treaded pneumatic wheels easily handle rough terrain and make tool transport nearly effortless. The Gravity, Rise is equipped with Universal Mounting Slots, which are designed to accommodate most major manufacturers portable table saws.

Bosch 1590EVSK Top Handle Jigsaw

The worlds best jigsaw just got better. Boschs Top Handle Jigsaw now Features an exclusive Precision Control Blade System that provides unsurpassed cutting accuracy. A powerful, 6.4 amp, variable speed motor cranks out between 500 and 2,800 strokes per minute for fast, smooth cuts. A One Touch Blade Change mechanism means less downtime and more productivity. The saws Constant Response Circuitry keeps the blade moving at the desired speed for added control and consistent performance. The saw also Features a wrench less foot with tension adjustment for fast, easy bevel cutting, trigger controlled variable speeds for matching the cutting speed to the job, a 4 position orbital action, and an adjustable blower. A soft grip handle means less operator fatigue, more comfort, and better control, and a padded overshoe prevents marring of the workpiece. Your purchase includes three blades, an anti splinter insert, and a durable carrying case.

DEWALT DC988GA Heavy-Duty XRP 18 Volt Cordless Hammerdrill/Cutoff Tool Combo Kit


For a limited time get two tools for almost the price of one. The DC988 18 Volt XRP ½ drill, driver, hammerdrill uses a DEWALT built high torque, high efficiency motor to deliver 500 in. lbs. of torque for drilling large diameter holes and driving large screws. This XRP drill comes equipped with a patented 3 speed transmission. The 3 speed option allows the drill to be set at the optimum speed range for the application being performed to maximize performance. The DC988 has a max speed of 2,000 RPM which is 38% faster than high speed. This unit has a maximum BPM speed of 34,000 BPM which allows for high performance drilling in masonry applications. All XRP drills feature a ½ all metal, ratcheting chuck with carbide jaws to prevent bit slipping and bit fall out. Every XRP drill is powered by an XRP extended run time battery that gives the drill long run time and battery life. The DC988 offers superior ergonomics providing optimal balance, comfort, and weight to minimize user fatigue. XRP drills are built to allow for the standard nut drivers, screwdriver, and bit tip holders to be stored on the tool. Designed for quick cutting and light grinding, in tight spaces and areas where power is not available. The DC410 4 1/2-inch cut off tool just made cutting easier and more convenient. Powered by DeWalt's 18 volt system, this tool allows users to expand their current 18 volt DeWalt system. It features a keyless a guard for convenience and versatility for cutting applications. In addition, the three position handle improves user comfort for multiple cutting applications. This kit also includes a grinding guard that provides versatility to do light grinding, polishing and sanding. The kit includes the DC988 drill, driver, hammerdrill, 360 degree side handle, double ended screwdriver bit, DC410 cut off tool, two batteries, one hour charger, type 1 and type 27 guard, one cutting wheel, one grinding wheel, wrench, and a contractors bag.

Hitachi M12V 3-1/4 HP Electronic Variable Speed 1/2" Plunge Router


Routers don't get any bigger and tougher than this Hitachi workhorse. It has the solid construction, horsepower, and features we've come to expect in a top of the line router. Its heft goes a long way toward eliminating vibration, working with the soft-start motor to cut out torque at startup. Despite its nearly 12 pounds, it actually handles as well as most 3 1/4 horsepower routers we have tried in freehand applications. It has a 1/2 inch collet and a wide sub base opening, making it suitable for working with all but the very biggest panel bits. It features electronic variable speed, so the router makes clean cuts in a wide range of different materials. We found the controls to be within easy reach of the handles, and though this is not the quietest router w ha've used, it comes pretty close. We like the unique eight position handles that let the tool be adjusted to the worker rather than the other way around. While this is a topnotch plunge router, it is also an excellent choice for table mounting, and many people choose this model for exactly that reason. This is an all around solid tool that offers more bang per buck than many competing models. Brian Trinen

Porter-Cable 557XXX Professional Plate Joiner Kit

Though this Porter Cable tool is priced higher than comparable DeWalt and Makita models, the 557 is Amazon.coms top selling plate joiner. Its success is perhaps due to its very powerful 7 1/2 amp motor; the largest in the industry, which turns the blade at 10,000 rpm and does an excellent job of making clean cuts in any kind of wood. As well as cutting slots for the standard no. 0, 10, and 20 biscuits, Porter Cables joiner features an exclusive, full thickness, FF biscuit developed especially for cabinet face frames. Another unique feature of the Porter Cable joiner is the 2-inch blade, which is small enough to make cuts in stock as narrow as 1 1/2 inches. We found the microheight adjustment works well, allowing for precise biscuit placement. The tool is well balanced and comfortable to use. Michael Shilling

Black & Decker PS1MVC 1-Hour Multi-Voltage Charger

1.5A, Hour Multi Charger, Charges 8.4V-14.4V Firestorm Battery Platforms With 3 Stage Charging Process, Also Charges 9.6V-14.4V Master Mechanic Battery Packs For Models TV230K, TV250K & TV260K-2, LED Charge Indicator Shows Pack Charging, Replace Pack and Pr

Bosch 1617EVSPK 2.25 Horsepower Electronic Variable Speed Plunge and Fixed Base Router Kit

The new Bosch 1617EVSPK gives you the best of both the fixed base and plunge router worlds! It features a 12 amp, 2 1/4 horsepower, 8,000 to 25,000 rpm ,no load motor with plunge base and fixed base in a rugged well organized carrying case. This kit features the exclusive quick clamp system, allowing tool free movement of motor from base to base. Other key features include variable speed, soft start, and Constant Response circuitry that maintains speed under load. The depth adjustment system features coarse and microfine bit depth adjustment with resettable indicators. Both bases have large base openings with 2 inch sub base openings, accepting larger bits and providing better visibility. The routers right or left switch and cord locations provide both choice and consistency, and the motor does not rotate during depth adjustment. The tool free templet guide adapter allows quick changes, and both bases feature the Bosch exclusive precision centering design for centering optional templet guides. The motor has a one piece armature shaft for accuracy and long bit shank capacity. The kit includes 1/2 inch and 1/4 inch self releasing collets, templet guide adapter, and comfortable drop forged wrenches. Multiple new optional accessories allow you to build a complete Bosch routing system.

Panasonic EY6432GQKW 15.6-Volt, 1/2" Cordless Hyperformance Drill with 2 NiMH Batteries

Raw power and 75 percent more capacity to run. With two 3.5 amp NiMH batteries and 390 in./lbs. of torque, packed into a 8.5 inch chassis. Its power, weight ratio is an unequalled package of peak performance. A fan cooled motor, with laser welded fields is state of the art technology. The motor's full torque speed control allows max torque delivery at any rpm, and offers dual speed ranges of 65 through 450 and 200 through 1450 with electronic brake and precision clutch fastening capabilities. Rubberized grip reduces operator fatigue and improves driving comfort. NiMH batteries possess superior charging and discharging characteristics, and are vented for longer cell life. Universal charger charges all past and present Panasonic batteries. Comes with high impact carrying case.

 
FastCounter by bCentral